Gaia
GAIA.ASU.SP.ESM.00007
Issue 2.00
Page 12 of 79
Astrium Ltd owns the copyright of this document which is supplied in confidence and which shall not be used for any purpose other than that for which it is supplied and shall not in
whole or in part be reproduced, copied, or communicated to any person without written permission from the owner.
GAIA.ASU.SP.ESM.00007 (Avionics SCOE Req Iss 2).doc
3.2 Avionics SCOE Controller
AVI-209/GSE-SYS-788/R
The Avionics SCOE Controller shall comprise a standard COTS Workstation Platform and Real Time
Operating System (i.e., LINUX-RT, VxWorks or MicroSoft Windows-RT).
AVI-3061/GSE-SYS-772/I,R
The Avionics SCOE Controller Workstation shall be configured to the minimum specification given
below:
Installed Memory (RAM): 2GB DDR2 ECC
Hard Disc Drive #1 100GB 7,200rpm
Hard Disc Drive #2 100GB 7,200rpm
Hard Disc Drive #3 500GB 7,200rpm
Display 19" LCD Flat Panel Monitor (DVI) 1280x1024 resolution
Graphics Controller 128MB Dual (DVI) - PCI-Express
Network Interface (CCS) 10M/100M/1000M Gigabit ETHERNET PCI-Express Network
Interface Card
Note: PCI-Express is required to achieve near-Gigabit
performance
Real Time Network Interface
(Reflective Memory)
As defined in Section 3.8
Optical Media: 16x DVD ±RW
Input Media: Keyboard and Optical Mouse Device
Backup System: DAT DDS5 backup tape system
AVI-211/CREATED/T
The Workstation platform processor shall be sized such that CPU average loading does not exceed
50% under any Avionics test configuration.
AVI-212/CREATED/I,R
The Avionics SCOE Controller Hard Disc Drives shall be utilized as follows:
• Hard Disc Drive #1: RTOS installation.
• Hard Disc Drive #2: Avionics SCOE Application Software (installation, runtime files and
IDE).
• Hard Disc Drive #3: Local Archive Disc.
AVI-4238/GSE-SYS-773/T
Automated routines shall be provided to allow backup of the Avionics SCOE Controller Hard Disc
Drives on a daily (delta) and weekly (complete) basis.
AVI-3102/CREATED/R
All Avionics SCOE Application Software files shall be placed under configuration control using a
Configuration Management tool to defined by the supplier. These files to include, as a minimum:
• Application Source Code
• Configuration Files
• Initialization Files
• Run Time Files
• Sequence Files
• Any tools provided as part of the Application
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais