APPENDIX AVI212 Especificações Página 40

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 79
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 39
Gaia
GAIA.ASU.SP.ESM.00007
Issue 2.00
Page 40 of 79
Astrium Ltd owns the copyright of this document which is supplied in confidence and which shall not be used for any purpose other than that for which it is supplied and shall not in
whole or in part be reproduced, copied, or communicated to any person without written permission from the owner.
GAIA.ASU.SP.ESM.00007 (Avionics SCOE Req Iss 2).doc
3.6.6.4 MPS Gas Flow Sensor Simulation
AVI-629/GSE-SYS-739/T
The MPS Gas Flow Sensor Simulation shall simulate the presence of (16x) Gas Flow Monitor
Sensors.
AVI-644/CREATED/T
The MPS Gas Flow Sensor driver shall conform to the following specifications: [AD06] Table 3.5-10
(Analog Driver Specification 2).
AVI-1612/CREATED/T
In all test modes, Gas Flow Simulation values shall be set asynchronously to simulate the Gas Flow
determined by the corresponding FCV pulse acquisition (see AVI-3581), using the following formula:
TBD
AVI-1613/GSE-SYS-739/T
To facilitate error injection towards the MPE, it shall be possible to overwrite the nominal coupled Gas
Flow Simulation from the local MMI or from the CCS (Test Procedure/Command Line).
AVI-4240/GSE-SYS-755/T
Simulation of all Gaz Flow Sensors shall be possible in parallel.
3.6.6.5 MPS Pressure Transducer Simulation
AVI-584/GSE-SYS-738/T
The MPS Pressure Transducer (PT) Simulation shall simulate the presence of 16 regulated pressure
transducers.
AVI-1616/CREATED/T
MPS Pressure Transducer Simulation shall conform to the requirements of: [AD06] Table 3.5-12
(Analog Driver Specification 3)
AVI-1617/CREATED/T
In open-loop test mode Simulated Pressures shall be commanded asynchronously by local MMI or by
the CCS (Test Procedure or Command Line).
AVI-1618/CREATED/T
In closed-loop test mode Simulated Pressures shall be commanded by the RTS.
Vista de página 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 78 79

Comentários a estes Manuais

Sem comentários